Albuquerque Waste Water Treatment Plant Coatings
Gallery Painting specializes in installing coatings in Waste Water Treatment Facilities. Waste Water Treatment Plant Coatings should be coated to protect from acids, petroleum, chemicals, and corrosive elements. When Waste Water Treatment facilities are exposed to the elements and chemicals and are not protected by a coating, this will cause the concrete; ferrous and non-ferrous metal substrates to deteriorate, and the substrate will need to be restored. When the specified coating is in need of restoration, a job walk and solution how to fix the coating with limited down time will be addressed. When Waste Water Treatment Plant Coatings are installed, they can range from 30%, 40%, 50%, 70%, 80% and 100% solids coatings.
Seamless Waste Water Treatment Facility Coatings
Gallery Painting's Waste Water Treatment Plant Coatings are seamless; ranging from coal tar epoxy, polyamine epoxy, elastomeric, epoxy modified cementitious mortar, cementittious coatings and polyester. Our industrial coatings for Waste Water Treatment Facilities are evaluated and selected for the appropriate coating based on the facilities exposure to chemicals and elements. Our staff and manufactures have the skill needed to choose the coating application that fits the need of the facility. Gallery Painting & Industrial Coatings Inc.'s Waste Water Treatment Facilities Coatings are suitable for any application to conform to various standards including NSF, USDA, FDA AND OSHA.
W.W.T.P Coatings Protect Substrates From
- Chemical Deterioration
- Natural Elements
W.W.T.P. Coatings Are Typically Used In
- Screening Rooms
- Grit Removal
- Aerated Basins
- Sludge Basins
- Pump Rooms
- Membrane Tanks
- Pump Stations