Albuquerque Elastomeric Coatings
Elastomeric Coating is a thick high fill paint that is flexible and waterproof. Elastomeric Coating is great for use in all climates due to its "breathing" capabilities and outstanding durability. Elastomeric Coating's ability to expand and contract in various weather conditions makes it the exterior product of choice. Elastomeric Coating is resilient in various weather conditions, such as heat, cold, sunlight, moisture and wind. Elastomeric Coatings are also extremely durable and can easily be maintained by pressure washing the surface to remove dust, dirt and other contaminates, and when applied properly will last many years.
Typical Elastomeric Coating Applications
Most metal and vinyl surfaces will accept Elastomeric Coatings. Most Elastomeric Coatings are typically applied to exterior substrates such as:
- Discolored or New Stucco
- Concrete Block
- Pre-Cast Concrete
- Fiber Cement Siding
- Weathered Wood
- New Wood
- Industrial Buildings
- Boat Houses
Fabric Wall Covering
Fabric Wall Covering is a kind of material used again for protection and decoration purposes. Fabric wall covering is much heavier in weight then Vinyl wall Coverings. Fabric Wall Covering is commonly used in residential homes, movie theaters, bars, clubs, airports, etc. Like Vinyl Wall Covering, Fabric Wall Coverings come in all different types, colors and textures and can also be custom made to the owner / architects specifications or match an existing logo or product image.
Fabric Wall Coverings should be taken care of properly. Do to the wide variety of Fabric Wall Coverings, the manufactures recommendations should be followed carefully. Fabric Wall Coverings are recommended for interior use and can be applied to most any surface once the proper preparation steps have occurred.
FRP (Fiber Reinforced Panels / Plastic / Polymer)
FRP is a composite made from fiberglass reinforcement in a plastic (polymer) matrix. By reinforcing the plastic matrix, a wide variety of physical strengths and properties can be designed into the FRP composite. Additionally, the type and configuration of the reinforcement can be selected, along with the type of plastic and additives within the matrix. These variations allow for an incredible range of strength and physical properties to be obtained.
Fiber Reinforced Panel composites can be developed specifically for the performance required versus traditional materials. Like Vinyl Wall Covering and Fabric Wall Covering, FRP comes in a wide variety of colors and textures.
Fiber Reinforced Panels are most commonly used in hospitals, areas of high sanitation, box stores, some schools, etc. FRP is also commonly used to strengthen the surface structure of walls. FRP can be applied both interior and exterior to most any substrate once proper preparation has occurred.
Dry Erase, Chalk Board, & Magnetic Wall Covering
Dry Erase Wall Covering
Dry Erase Wall Covering is a roller applied white board that turns almost any surface into a high performance dry erase surface. Dry Erase Wall Covering is highly recommended for office / conference rooms, school, daycares, hospitals, pretty much any area you would like to write on the walls!
Chalk Board Wall Covering
Chalk Board Wall Covering is a type of paint which dries to a finish roughly resembling that of a Chalk Board. Once the Chalk Board paint has been applied to a surface, it can be used just like a regular Chalk Board. Chalk Board paint is highly recommended for schools, daycares, homes, and almost anywhere you can think. Chalk Board paint is comes in a wide variety of colors.
Magnetic Wall Covering
Magnetic Wall Covering is a wall covering that can be sprayed into position or applied to the wall using a paintbrush. Different brands of this type of primer or paint use ingredients that are magnetic in nature. This makes it possible to apply decorative magnets to the wall in the same manner that magnets are applied to refrigerator doors and other metal surfaces. Magnetic Paint can be used most anywhere, and comes a variety of colors.